Up to 11,000 Gauss
Easy to use
- Build or modify your own magnetic separation equipment with Alpha
Magnetics' range of Magnetic Tubes.
- Magnetic Tubes, sometimes known as Magnetic Cartridges or Magnetic Bars, can remove unwanted ferrous material
and contamination from dry particle products,
liquids or slurries.
- By mounting within your existing equipment, either individually or in
multiple-row arrays, tubes can be a cost-effective do-it-yourself solution.
Choice of Magnetic Materials and Strengths
- Tubes consist of magnets that are fully encapsulated within stainless
steel tubing to create a strong magnetic field along the side of the tube to
attract and retain ferrous material.
- Ends are fully seal welded and can be either plain or tapped for mounting.
- We provide a variety of different styles and strengths designed to suit
different applications or budgets using either Rare Earth (Neodymium) or Ferrite Ceramic magnetic material.
Standard Tubes
- For standard applications the tubes are either 25mm or 25.4mm (1") diameter.
(Other sizes are possible)
- Construction uses type 304 or 316 stainless steel tubing.
- High temperature options available.
1) 11,000 Gauss Rare Earth
- Our highest magnetic strength tubes. (Measurement refers to peak
surface readings at the magnetic poles).
- Available in stock size lengths of 100mm, 150mm, 200mm, 250mm, 300mm &
400mm for immediate delivery.
- Other sizes are available on special order.
2) 10,000 Gauss Rare Earth
- Our standard very high strength Rare Earth tube, custom made in our Melbourne
factory to any length.
3) 6,000 Gauss Rare Earth
- Our more economical but still high strength Rare Earth tube, custom made
in our Melbourne factory to any length.
4) Ferrite Ceramic
- Ferrite Ceramic is the most cost-effective solution for those on a budget.
- Good for larger tramp but not appropriate for removing fine ferrous contaminants.
- Custom made in our Melbourne factory to any length.
Heavy Duty Tubes
- For heavy duty applications and/or large or abrasive product, we also
manufacture heavy duty
tubes that are 38.1mm (1.5") square.
- These tubes should be mounted at 45 degrees to the direction of product flow and
allow a wider spacing between tubes than standard round tubes.
Fast Delivery
- Most standard sizes can be produced in 2-3 working days with specials
quoted to suit your needs.
Back to Alpha Magnetics Home.